Rack-mounted lithium-ion battery
Rack-mounted lithium-ion battery
Rack-mounted lithium-ion battery
Rack-mounted lithium-ion battery
Rack-mounted lithium-ion battery

Rack-mounted lithium-ion battery

This is an ultra-high performance 51.2v200ah rack-mount lithium battery module that uses safe and long-life lithium iron phosphate (LiFePO₄) cells with high stability, low self-discharge rate and excellent shallow charge/discharge performance, designed for a variety of applications including renewab…

  • Type :  Rack-mounted lithium-ion battery
  • Power :  51.2V/5.12KWh-10.24KWh
  • Energy Capacity :  16 units (81.92 kWh);16 units (163.84 kWh)
  • Battery Cell :  LiFePO4

Send Message   Get Price

Parameters

Product Parameters

Product model HJ-HBL48101R(B-23) HJ-HBL48202R(B-24)
Battery Chemistry Type Lithium iron phosphate (LiFePO4) Lithium iron phosphate (LiFePO4)
Capacity (ampere-hours) Ah 100 200
Expandability Maximum parallel connection: 16 units (81.92 kWh) Maximum parallel connection: 16 units (163.84 kWh)
Nominal Voltage (volts) 51.2 51.2
Operating Voltage (volts) 46 – 56 46 – 56
Energy (kilowatt-hours) 5.12 10.24
Available Energy (kilowatt-hours) 4.61 9.22
Charging Voltage 58.4 58.4
Charge/Discharge Current (amps) Recommended value: 50 Recommended value: 100
Maximum value: 80 Maximum value: 150
Peak (2 minutes, 25°C): 100 Peak (2 minutes, 25°C): 200
Recommended Discharge Depth 90% 90%
Dimensions (width/height/depth, millimetres) 482 x 461 x 133 482 x 213 x 760
Approximate Weight (kilograms) 42.5 89.5
Main LED Indicator 4 LEDs (displaying State of Charge SOC: 25% – 100%) 4 LEDs (displaying state of charge SOC: 25% – 100%)
2 LEDs (displaying operational, alarm, and protection status) 2 LEDs (displaying operational, alarm, and protection status)
Enclosure Protection Rating IP20 IP20
Operating Temperature Charging: 0°C – 55°C; Discharging: -20°C – 55°C Charging: 0°C – 55°C; Discharging: -20°C – 55°C
Storage Temperature 0°C – 35°C 0°C – 35°C
Humidity 5% – 95% 5% – 95%
Altitude ≤2000 metres ≤2000 metres
Cycle Life (25±2°C, 0.5C/0.5C, 80% life termination) ≥6500 cycles ≥6500 cycles
Installation Method 19-inch rack-mount installation 19-inch rack-mount installation
Communication Interface CAN2.0, RS485 CAN2.0, RS485
Warranty Period 5 years 5 years
Lifetime Energy Within Warranty Period 22.42 MWh (80% end-of-life) 80MWh (80% end-of-life)
Certification CB-IEC62619, CE-EMC, MSDS, UN38.3 IEC62619, CE-EMC, MSDS, UN38.3

Note: Specifications are subject to change without prior notice for product improvement. Data Sheet

Feature

  • Easy installation

    Standard 19-inch rack design, quick and easy installation.

  • Safe and reliable

    Using high-safety lithium iron phosphate positive electrode material, it can be used for more than 6 months without charging. No memory effect, excellent partial cycle performance.

  • Intelligent Battery Management System (BMS)

    Equipped with overcharge, over-discharge, overcurrent and temperature protection functions. Automatically balance the cell voltage and current.

  • Environmentally friendly design

    Using non-toxic and pollution-free materials, in line with environmental standards.

  • Flexible configuration

    Support multiple modules in parallel to achieve capacity/power expansion. Support USB, Wi-Fi (optional) and remote firmware upgrade (compatible with GSL inverter).

Application

The rack-mounted lithium-ion battery system, with its efficient integration, high performance, intelligent management, and high reliability, provides an ideal energy storage solution for critical applications such as data centers, communication base stations, and industrial automation, ensuring stable equipment operation and efficient energy utilization.

View Case Studies

Solution

Base station stacked photovoltaic system

Base station stacked photovoltaic system

Stacked MPPT photovoltaic controller expands PV capacity for base stations. Series-connected PV modules feed the controller, output -48V DC to loads. Supports wall/pole mounting; available in Outdoor and Rack-mount types.

Stacked MPPT photovoltaic controller is a product specially developed for photovoltaic energy expansion in base station scenarios. The series connection technical solution consists of PV modules, a stacked MPPT controller, and a DC ammeter; each photovoltaic module is connected in series to the cont…

View More
Base Station Equipment Room Energy Scenario

Base Station Equipment Room Energy Scenario

Site hybrid energy series focuses on green, efficient, reliable, and intelligent power solutions. It includes integrated supplies, AC-DC converters, 5G power boxes, and hybrid cabinets, supporting PV, wind, and energy storage to create a flexible “New Energy + Grid + Storage” system.

site hybrid energy product series focuses on green low-carbon, high efficiency, reliability, and intelligent coordination. It covers all-scenario power equipment including integrated power supplies, AC-DC converters, outdoor 5G power boxes, indoor/outdoor hybrid energy cabinets, and equipment room p…

View More
Hybrid Energy Communication Site

Hybrid Energy Communication Site

It covers all-scenario power equipment including integrated power supplies, AC-DC converters, outdoor 5G power boxes, indoor/outdoor hybrid energy cabinets, and equipment room power cabinets. It fully supports new energy sources such as PV and wind power, building a hybrid power distribution system of “New Energy + Grid Power + Energy Storage.

Hybrid energy product series focuses on green low-carbon, high efficiency, reliability, and intelligent coordination. It covers all-scenario power equipment including integrated power supplies, AC-DC converters, outdoor 5G power boxes, indoor/outdoor hybrid energy cabinets, and equipment room power …

View More
Compact Communication Site

Compact Communication Site

Compact Communication Site is an integrated and intelligent core equipment of the telecom power system, widely used in mobile base stations, data centers, and other scenarios.

Compact Communication Site is an integrated and intelligent core equipment of the telecom power system, widely used in mobile base stations, data centers, and other scenarios. It integrates power supply, power distribution, backup power, wall/pole mounting, and monitoring into one unit, providing st…

View More
PV-Replacing-Diesel Scenario

PV-Replacing-Diesel Scenario

Stacked MPPT photovoltaic controller is designed for diesel-powered base stations to expand PV capacity, add energy storage, and cut diesel use. Series-connected PV modules feed the controller, which outputs -48V DC to loads. Excess energy charges storage; shortages are supplemented, boosting green energy and efficiency.

Stacked MPPT photovoltaic controller is a product specially developed for existing base stations using diesel generator scenarios, to expand PV capacity, add energy storage, and reduce diesel consumption. The series-connection technical solution consists of PV modules, a Stacked MPPT controller, a D…

View More

Request a Quote

Please Choose Product Type
  • Industry and Commerce Energy Storage Systems
  • Base Station Energy Storage
  • Residential Energy Storage Systems
  • Photovoltaic Module
  • HJ-HBL Battery
  • Energy Storage Inverter
  • Energy Management System
  • Other

Seamless Service Anytime You Need lt

We're committed to providing prompt, professional support to ensure your energy needs are always met with the highest level of service.

  • Reply within 24 hours
  • 24 hours telephone support
x
Contact Us

We're here to answer your questions and provide the energy solutions that best fit your needs.

Please Choose Product Type
  • Industry and Commerce Energy Storage Systems
  • Base Station Energy Storage
  • Residential Energy Storage Systems
  • Photovoltaic Module
  • HJ-HBL Battery
  • Energy Storage Inverter
  • Energy Management System
  • Other